Order By Sunday, December 17th to receive by Christmas!

HY-C Company 10 Results

View

HY-C Company 6" Superpro Storm Collar

$74.99 $30.00

  • Designed for use with SuperPro Chimney pipe
  • Use a storm collar on through-the-roof installations
  • Made of stainless steel and painted black
  • Manufacturers Limited Lifetime Warranty
  • Listings: safety tested and listed to applicalbe UL/ULC standards; USA: UL 103HT

HY-C Company 3" Pellet Vent Pipe Wall Bracket/Support

$59.99 $24.00

  • Selkirk Pellet Pipe Wall Bracket/Support is used to support vent pipe or tee sections
  • VP Pellet Pipe is used for venting pellet or corn burning stoves approved for use with PL-Vent
  • The appliance's flue gases must not exceed 570° F (298.80° C)

HY-C Company 3" Pellet Pipe Adjustable Flashing

$28.99 $11.60

  • For use as roof flashing
  • Use only with Selkirk pellet stove pipe
  • Keeps water and other debris from entering between the pipe and roof
  • Adjustable pitch

HY-C Company 3" 45 Degree Elbow

$44.99 $18.00

  • Used for a 45° offset and can be used in vertical and horizontal installations
  • Features proven gasketed coupling joints that connect in seconds to assure joint integrity
  • Constructed of 304 stainless steel inner wall and paintable galvanized outer wall
  • Internal spacing bead assures uniform insulating air space between pipe walls, and allows for 3" clearance to combustible materials
  • Male end is rolled over eliminating sharp edges

HY-C Company 3" Multi-Fit Chimney Connector

$34.99 $14.00

  • Used to transition Pellet Pipe to existing chimney
  • Can be used in vertical and horizontal installations
  • Features proven gasketed coupling joints that connect in seconds to assure joint integrity
  • Constructed of 304 stainless steel inner wall and paintable galvanized outer wall
  • Internal spacing bead assures uniform insulating air space between pipe walls, and allows for 3" clearance to combustible materials

HY-C Company 3" Pellet Vent Pipe Vertical Termination Cap

$31.99 $12.80

  • Selkirk Vertical Termination Cap is used for vertical installations only
  • It is required where pipe terminates above the roofline
  • Used for venting pellet or corn burning stoves approved for use with PL-Vent
  • The appliance's flue gases must not exceed 570° F (298.80° C)

HY-C Company 3" Pellet Horizontal Termination

$54.99 $22.00

  • 3" horizontal termination cap
  • Type L insulated pipe for pellet stove applications

HY-C Company Stove Board

$59.99

  • Protects floors from the intense heat, hot coals, ashes and soot that wood stoves produce
  • Use under other heating appliances such as kerosene, gas and electric heaters
  • Non-UL Lined
  • Dimensions: 36" x 48"
  • Lined Walnut Woodgrain pattern

HY-C Company 3VP-6 VP 3" Type L Pellet Vent

$21.99 $8.80

  • 3" Type L Pellet Vent 6" Pipe Length from the VP Collection Pipe lengths provide the core part of the chimney system
  • Pipes should match the inside diameter of all other pieces and all pieces should be from the same manufacturer
  • The fittings overlap 1.5" so the installed length is 1.5" less than the listed length

HY-C Company 3" Pellet Vent Pipe Storm Collar

$4.99 $2.00

  • Selkirk Strom Collar is designed to maintain a weather tight resistant seal between the pipe and the flashing
  • Used for venting pellet or corn burning stoves approved for use with PL-Vent
  • The appliance's flue gases must not exceed 570° F (298.80° C)
View