Mat Industries 23 Results

View

Mat Industries Powermate 1/4" NPT Air Filter

$24.99

  • Manual drain to remove solid contaminants and bulk liquids
  • Threaded polycarbonate bowl for easy filter element change
  • Installs in-line
  • Includes optional mounting hardware

Mat Industries Powermate Mini Air Grinder

$17.99

  • Perfect for grinding, deburring, smoothing, sharpening
  • Intrinsic throttle lever provides improved comfort and control
  • Double ball bearing construction
  • Small and lightweight with easy one-hand operation
  • Includes 1/8” and 1/4” collets and collet wrenches

Mat Industries Powermate Regulator 1/4" NPT with Gauge

$19.99

  • Provides reliable pressure control
  • 1/8" NPT gauge port can be used for an additional outlet
  • Installs in-line
  • Easy to read pressure gauge
  • Optional mounting hardware

Mat Industries Powermate Air Hammer with Chisels

$14.99

  • Ergonomic handle with two-finger trigger
  • Built-in speed control adjusts hammer power
  • Cold chisel
  • Ripping chisel
  • Punch
  • Panel cutter
  • 5,000 blows per minute
  • 1-5/8” stroke
  • 1/4” NPT air inlet with screened filter

Mat Industries 3/8" Ball Valve Kit

$7.99

  • 3/8-Inch Ball valve, with 3/4-Inch NPT M by 3/8-Inch NPT F bushing and 3/8-Inch by 3/8-Inch NPT pipe fitting
  • Replace non working compressor drain valve with a Powermate ball valve
  • Powermate ball valve kit comes with the fittings needed to replace a leaky drain valve or an old ball valve
  • For optimal performance compressor should be drained after each use

Mat Industries 5 Piece Inflator Kit

$5.49

  • Includes 1/4-Inch NPT female hose connector and 1/4-Inch by 1/8-Inch connector
  • Includes inflation needle
  • Includes tapered nozzle and extension tube
  • Use with any air compressor and hose

Mat Industries 150 PSI ASME Pressure Relief Valves

$5.49

  • ASME
  • 150 psi
  • A working pressure relief valve is necessary when operating a compressor

Mat Industries Powermate 1/2"X 1/2" Check Valve with Bleeder

$9.49

  • 1/2-Inch NPT by 1/2-Inch tube with 1/8-Inch bleeder
  • Durable valve closes when air has been drained from the compressor head
  • Compressor check valve needs to be replaced when it does not close during compressor shut down and allows air to leak back into the compressor head
  • A faulty compressor check valve will harm a compressor

Mat Industries 300 PSI Bottom Pressure Gauge

$5.49

  • 300 psi
  • 2-Inch Face with 1/4-Inch bottom connect
  • Gauge is both durable and easy to read
  • Part of the Powermate replacement part line

Mat Industries 160 PSI Pressure Gauge

$5.49

  • 2-Inch Face with 1/4-Inch bottom connect
  • For use with air carry tanks
  • Gauge is both durable and easy to read
  • Part of the Powermate replacement parts line

Mat Industries Powermate 250 PSI Back Pressure Gauge

$5.49

  • 250 psi
  • 1.5-Inch Face with 1/4-Inch back connect
  • Gauge is durable and easy to read
  • Part of the Powermate replacement part line

Mat Industries 175 PSI ASME Pressure Relief Valve

$5.49

  • ASME
  • 175 psi
  • A working pressure relief valve is necessary when operating a compressor

Mat Industries Powermate Inlet V Twin Filter Assembly

$8.49

  • Powermate genuine replacement parts
  • A filter element allows air to be pumped cleanly and efficiently
  • This keeps the compressor and air tools being used running smoothly and efficiently

Mat Industries 300 PSI Back Pressure Gauge

$5.49

  • 300 psi
  • 2-Inch Face with 1/4-Inch back connect
  • Gauge is both durable and easy to read
  • Part of the Powermate replacement part line

Mat Industries Powermate 2 Piece Aluminum Oxide Disk

$6.99

  • Excellent for cutting sheet metal, sanding, leveling, and trimming corners
  • Maximum safe speed 20,000 RPM
  • Two disks per package

Mat Industries 270 PSI Back Pressure Gauge

$5.49

  • 270 psi
  • 1.5-Inch Face with 1/8-Inch back connect
  • Gauge is both durable and easy to read
  • Part of the Powermate replacement part line

Mat Industries 200 PSI ASME Pressure Relief Valve

$5.99

  • ASME
  • 200 psi
  • A working pressure relief valve is necessary when operating a compressor

Mat Industries 1/4" NPT Wing Style Tank Drain

$2.99

  • 1/4-Inch NPT
  • Wing style
  • Powermate tank drain valve creates a snug fit to prevent unwanted air or water seepage
  • Drain compressor regularly for optimal performance

Mat Industries 4 Port Pressure Switch

$15.49

  • 4 Port with bleeder
  • Powermate pressure switch is durable and long lasting
  • Powermate pressure switch allows air compressor to run at its most efficient capacity, turning on and off the motor at the correct psi

Mat Industries POWERMATE 019-Powermate Inlet Oil Free Pumpfilter Element

$3.49

  • Replace old, plugged filter elements with a new Powermate air filter element
  • Old filter elements can cause compressor problems and should be replaced to keep the unit running at its highest level
  • For use with direct drive single cylinder pumps

Mat Industries 1/4"X1/4"NPT Female Swibel Plug

$1.79

  • 1/4" NPT male thread
  • Steel

Mat Industries Powermate 160 PSI Pressure Gauge

$4.99

  • 1.5-Inch Face with 1/8-Inch bottom connect
  • Durable and easy to read
  • For use with air carry tanks
  • Part of Powermate replacement part line

Mat Industries Powermate 8 Oz. Air Tool Oil

$2.49

  • Lubricate mechanical parts to improve tool operation
  • Extends tool life
  • Superior adhesion to metal surfaces
  • Reduces premature wear
View