Buy Online, Pickup In-Store. Start Your Order!
- Departments
Structural Framing Screw
Grabber Tie-Master Multi-purpose wood fastener for general wood construction such as ledger boards, laminated beams, under-deck connections, trusses and dimensional lumber, decks, docks and boardwalks.
Featuring flat #40 Star head countersinking design for flush finish and DrawTite shank pulling members tight together. Type 17 cutter point eliminates pre-drilling in. Mechanical galvanized exterior coating for corrosion resistance.
Features
#14 Thread
4 in L
Coarse Thread
Flat Head
Torx Drive
50 PK
Head seats flush and does not protrude above the wood surface
Pulls both wood members together for a secure fastening job
Tie-Master fasteners may be used in place of 1/4 in and 3/8 in lag screws and is code approved for use in treated lumber
Its friction reduction exterior coating, type 17 point and aggressive 9 TPI threads zip right into the densest woods
Tie-Master timber fasteners are mechanically galvanized-coated against corrosion B695 Class 55
GrabberGard coating consists of three layer first layer is a metallic zinc layer, the second layer is a high-grade anti-corrosion chemical conversion film and the third outer layer is baked ceramic surface coating
| Brand | Grabber Construction |
|---|---|
| Manufacturer Number | GTIE4CP |
| UPC Code | 045622044858 |
| Warning | WARNING: This product can expose you to chemicals that are known to the State of California to cause cancer/birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. |
| Weight (Lbs) | 2.64 |
Grabber Tie-Master Multi-purpose wood fastener for general wood construction such as ledger boards, laminated beams, under-deck connections, trusses and dimensional lumber, decks, docks and boardwalks.
Featuring flat #40 Star head countersinking design for flush finish and DrawTite shank pulling members tight together. Type 17 cutter point eliminates pre-drilling in. Mechanical galvanized exterior coating for corrosion resistance.
Features
#14 Thread
4 in L
Coarse Thread
Flat Head
Torx Drive
50 PK
Head seats flush and does not protrude above the wood surface
Pulls both wood members together for a secure fastening job
Tie-Master fasteners may be used in place of 1/4 in and 3/8 in lag screws and is code approved for use in treated lumber
Its friction reduction exterior coating, type 17 point and aggressive 9 TPI threads zip right into the densest woods
Tie-Master timber fasteners are mechanically galvanized-coated against corrosion B695 Class 55
GrabberGard coating consists of three layer first layer is a metallic zinc layer, the second layer is a high-grade anti-corrosion chemical conversion film and the third outer layer is baked ceramic surface coating
| Brand | Grabber Construction |
|---|---|
| Manufacturer Number | GTIE4CP |
| UPC Code | 045622044858 |
| Warning | WARNING: This product can expose you to chemicals that are known to the State of California to cause cancer/birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. |
| Weight (Lbs) | 2.64 |